18 Density Glue Lamination Foam
Product Code: FV-In Rolls-18G
We offer 18 Density Glue Lamination Polyether based foam in rolls form, widely used for various Glue lamination applications globally. 18 Density foam are most commonly used for glue lamination as they are both economical and give good lamination bonding.
Glue lamination process offer better bonding strength compared to Flame Lamination therefore is consider better for products and end application where high bonding strength is required.
These foam further contains quality additives to offer better Glue lamination properties and are considered best to meet a broad range of industrial & comfort applications.
We process these foam through Looper with joint option at 30, 60, 120 meters as per specific customer requirement.
Description
Country of Origin: Indian and China
| Parameters | Values |
|---|---|
| Density (Kg/m3) | 18 (+/-)2 |
| Tensile Strength (Kgf/cm2) | Greater than 1 |
| Elongation (%) | Greater |
| Hardness Value (IFD) Kg/323 cm2 at 50% Compression | 28 (+/- 4) |
| Resilience (%) | Greater than 27 |
| Air Flow (%) | 75-90 |
Note: We are in a position to offer wide range of Flame Lamination foam grades in any required Density, Size, Quantity, Color against specific requirements. Please share your detailed requirements at info@foamvilla.com enabling us to serve you better.
Processing wide range of glue lamination products such as Bath Mats, Car Seat Covers, Shoe Upper, Horse Saddle, Table Mats to name a few.
Density: 18 Kg/m3.
Common Thickness: 1.6 mm to any required.
Common Width: Starting from 1.30 meters up to 2 meters.
Common Color: White, Grey and Black.
Preferred Lamination: Glue
Supply: No supply constraint.
Packaging: Each Roll in an HM plastic sheet and then in an HDPE bag.
Compressed Packaging: Possible.
Delivery: Within 5 days once the order is confirmed.
- Economical & Cost Effective grade.
- Offer good Glue lamination properties.
Related Products and Applications
18 Density Polyester Foam
18 Density Polyester FoamProduct Code: FV-In Rolls-18P
We offer 18 Density Polyester foam in roll form for both flame and glue lamination applications, most widely used for flame lamination for various applications across the World. For flame lamination application 18 Density foam are considered Medium Density foam grades and have high consumption in processing flame lamination products.
Polyester Polyurethane foams are processed by mixing high-quality polyols with catalysts at the time of foaming. These foams have a higher viscosity rate & regular fine cell structure with a high number of open-cell compared to Polyether Polyurethane foams. Polyester foams look similar to Polyether based foam but offer better mechanical strength and are not affected by petroleum products therefore are widely used in the automotive industry.
23 Density Flame Lamination Foam
23 Density Flame Lamination Foam
23 Density Flame Lamination Foam
23 Density Flame Lamination FoamProduct Code: FV-In Rolls-23F
23 Density Flame Lamination foam offer better Elongation, Tensile & Mechanical Strength, Resilience, Hardness and Hand Feel compared to other low density foam grades (15 kg/m3 and 18 Kg/m3). These foam grades are considered best for flame lamination of High-end lamination products and other comfort products.
These foam are processed using high quality additives to offer better flame lamination properties with minimum thickness loss in the flame lamination process.
Supreme Fleece Blankets
Supreme Fleece BlanketsProduct Code: FV-Blankets-Supreme Fleece
As the name suggests, we process and offer blankets made from High quality, high gsm (gram per square meter) flannel fleece offering extra thickness, plush, softness, warmness.
Supreme Fleece blankets are processed in different sizes (50 X 60 inches, 60 X 90 inches, 90 X 90 inches, customized) & packaging options ( polybag, bale, carton, customized) to meet specific customer pricing, market, comfort, durability requirements.
With years of product experience and large production facilities, we offer Supreme fleece blankets in different colours, weight, gsm (gram per square meter), thread count, stitching options as per specific customer & market needs.
32 Density UV Lamination foam
32 Density UV Lamination foam
32 Density UV Lamination foam
32 Density UV Lamination foamProduct Code: FV-In Rolls-32UV
32 Density UV Glue Lamination foam are specially processed for applications where foams UV light exposure is required. UV Stable foams are processed using special post-treatment additives in polyols before foaming enabling these foams to be UV stable. These foams are supplied in roll form for glue lamination process. With UV additives these foam also contain high quality glue lamination additives to offer best after lamination results.
Glue lamination is considered best for UV foam lamination as it result in zero thickness loss and yellowishness effect compared to Flame lamination process.
We process these foam with joint option at 30 & 60 meters.
